RADVision SCOPIA 1000 Betriebsanweisung PDF herunterladen (Seite 66)

'Maintenance Tasks' | 60

RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0

Step 4 Set the fields as required.

Note: To configure the network, contact your network administrator.

Step 5 Press Save.

Configuring the System for SNMP Management

iVIEW/NMS integration allows remote monitoring, configuring, upgrading and control features of

SCOPIA XT1000 terminals, using SNMP (Simple Network Management Protocol) and an AT

command-based protocol on TCP/IP. In particular, these features have been introduced:

• Monitoring - iVIEW/NMS can request identification and access capabilities from the terminal.

• Status traps - iVIEW/NMS is able to detect if the terminal is turned on, and its call status.

Procedure

Step 1

In the Administrator settings menu scroll to Utilities.

Step 2 Select Remote access.

Step 3 Select the SNMP page.

Field Name Description

AT commands management Enables/disables AT Command API for remote control.

Enable all addresses If set to Yes, enables access to the Codec Unit from any IP address

in a network. If set to No, configure Address and SubNet mask.

Address Enter the IP address allowed to access the system.

SubNet mask Enter the SubNet mask associated with the IP address.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 78 79

Keine Kommentare

RADVision SCOPIA 1000 Betriebsanweisung Seite 66