RADVision SCOPIA 1000 Betriebsanweisung PDF herunterladen (Seite 38)

'Initial Configuration' | 32

RADVISION | Administrator Guide for SCOPIA XT1000 Version 2.0

Configuring Network Settings

Configuring Preferences

General Network Settings

This page allows you to configure the network general settings:

1. IPv6 is supported in addition to IPv4 . There is no IPv6-only mode.

2. Management (HTTP, SSH, FTP) is IPv4 only (even in dual mode).

3. Media streams in the same conference can be a mixture of IPv4 and IPv6.

4. You can configure the IPv6 address manually or automatically.

You may also access this page from a previous screen in the configuration.

Procedure

Step 1 In the Administrator settings menu select Networks.

Step 2 Scroll to Preferences.

Step 3 Select the General page.

Step 4 Set the fields as required.

Step 5 Press Save.

Configuring Dynamic Ports

Note: When a firewall is crossed, the firewall administrator must open a range of dynamic TCP and UDP

ports to allow bidirectional IP traffic. Moreover, once the ports have been opened, the protocols

[TCP 1720 (Q.931), TCP 1503 (T.120), UDP 1719, and 1718 (RAS)] involved in a call must be taken

into account.

Field Name Description

Use IPv6 Enables/disables IPv6 support.

Priority Sets GLAN/LAN priority. Specifies in which order the system will

place outgoing calls. If you acquired the LAN licence from

RADVISION, the GUI will show the LAN button.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 78 79

Keine Kommentare

RADVision SCOPIA 1000 Betriebsanweisung Seite 38