RADVision Scopia XT1000 Installationsanleitung PDF herunterladen (Seite 15)

'Hardware Setup' | 11

RADVISION | Installation Guide for SCOPIA XT1000 Version 2.0

Step 6 Connect the LAN or GLAN input to the network .

Note: From software version 2.0.7B only the GLAN input is enabled. You need to purchase a

licence to use the LAN input.

Step 7 Connect additional audio or video equipments to the available inputs/outputs (see Connecting the

Audio System page 14 or Connecting the Video System page 17).

Step 8 Connect the power supply of the Codec Unit.

Step 9 Power the monitor on.

Step 10 Press the Power button at the back of the XT1000 Codec Unit. The LED on the front of the XT1000

Codec Unit indicates system status:

• LED on: System is on and normally operating.

• LED flashing: System power is on, but the system is in standby mode.

• LED off: System power is either off or not connected.

Step 11 Wait for the main graphical user interface (GUI) to appear. To configure the system, see the

SCOPIA XT1000 Administrator Guide. To use the system, see the SCOPIA XT1000 User Guide.

GLAN/LAN Hardware Setup

The LAN and GLAN ports can be used simultaneously, connecting each to different networks (for

example: private and public network).

LAN connection is not available by default. Contact RADVISION to acquire a license to activate the

connection. Enabling LAN will require a system restart.

These are the setup possibilities:

• In case you need to connect the Codec Unit to one network (private or public), we recommend

to connect the network to the GLAN connection and configure only GLAN in the Codec Unit

GUI.

Figure 2-4 Single Network Connection

• In case you need to connect the Codec Unit to a private network and a public network and

you have one router interfacing the Codec Unit in the private network, we recommend to

connect the private network to the GLAN connection, and the public network to the LAN

connection.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 28 29

Keine Kommentare

RADVision Scopia XT1000 Installationsanleitung Seite 15