RADVision Scopia Elite 5100 Series Bedienungsanleitung Seite 1

Quick StartSCOPIA Elite 5100 Series MCUVersion 7.1

6 SCOPIA Elite 5100 Series MCU Quick StartCHANGE THE DEFAULT ADMINISTRATOR PASSWORDThe default administrator password of the MCU is password. We recom

Define Gatekeeper Settings 76. Click Apply.After confirming your settings, the MCU is automatically updated with the new service profile settings. DE

8 SCOPIA Elite 5100 Series MCU Quick StartCREATE A MEETINGThe following is a brief introduction for setting up your first meeting. It includes example

Create a Meeting 9Dialing to the MCU using the MCU IP address  Procedure 1. Dial from the endpoint to the MCU IP address.You access the MCU Auto Att

10 SCOPIA Elite 5100 Series MCU Quick Start

NOTICE© 2005-2010 RADVISIONLtd. All intellectual property rights in this publication are owned by RADVISION Ltd and are protected by Italy and United

What’s Inside 1Quick StartWHAT’S INSIDE This Quick Start provides the basic steps required for getting your MCU up and running. The suggested order of

2 SCOPIA Elite 5100 Series MCU Quick StartFigure 1 SCOPIA Elite 5100 Front PanelTable 1 SCOPIA Elite 5100 Front PanelCOMPONENT DESCRIPTION1 STATUS LED

Prepare a Checklist 3PREPARE A CHECKLISTBefore you start configuration, fill in the checklist below: IP address: _ _ _. _ _ _. _ _ _. _ _ _  IP sub

4 SCOPIA Elite 5100 Series MCU Quick Start PC with available serial port and terminal emulator software installed Serial cable  Procedure 1. Connec

Assign an IP Address to the MCU 58. Enter 2 to change the network configuration.9. Enter the IP address you want to assign to the MCU at the Enter IP